====== Valentina Server Properties ======

On this page you can see list of system Valentina Server properties. You can get the list of properties using SHOW PROPERTIES OF SERVER; command. 
To change any of these properties server admin privilege required.

==== ACCESSCONTROLLIST==== 

Read-write system property. Operates with ACCESSCONTROLLIST param in ini-file of the server.

<code>
GET PROPERTY ACCESSCONTROLLIST OF server;
SET PROPERTY ACCESSCONTROLLIST OF server TO '-0.0.0.0/0,+192.168.0.0/16';
</code>


==== BONJOURENABLE==== 

Read-write system property. Operates with BONJOURENABLE param in ini-file of the server.

<code>
GET PROPERTY BONJOURENABLE OF server;
SET PROPERTY BONJOURENABLE OF server TO 0;
</code>

==== BONJOURPROTOCOLNAME==== 

Read-write system property. Operates with BONJOURPROTOCOLNAME param in ini-file of the server.

<code>
GET PROPERTY BONJOURPROTOCOLNAME OF server;
SET PROPERTY BONJOURPROTOCOLNAME OF server TO 'valentina';
</code>

==== BONJOURSERVICENAME==== 

Read-write system property. Operates with BONJOURSERVICENAME param in ini-file of the server.

<code>
GET PROPERTY BONJOURSERVICENAME OF server;
SET PROPERTY BONJOURSERVICENAME OF server TO 'valentina';
</code>

==== CACHESIZE==== 

Read-write system property. Operates with CACHESIZE param in ini-file of the server.

<code>
GET PROPERTY CACHESIZE OF server;
SET PROPERTY CACHESIZE OF server TO 10;
</code>


==== CRASH_REPORTER_OWNER_EMAIL ==== 

Read-write system property. Operates with CRASH_REPORTER_OWNER_EMAIL param in ini-file of the server.

<code>
GET PROPERTY CRASH_REPORTER_OWNER_EMAIL OF server;
SET PROPERTY CRASH_REPORTER_OWNER_EMAIL OF server TO 'name@host.com';
</code>


==== CRASH_REPORTER_OWNER_NAME ==== 

Read-write system property. Operates with CRASH_REPORTER_OWNER_NAME param in ini-file of the server.

<code>
GET PROPERTY CRASH_REPORTER_OWNER_NAME OF server;
SET PROPERTY CRASH_REPORTER_OWNER_NAME OF server TO 'John Smith';
</code>


==== CRASH_REPORTER_SEND==== 

Read-write system property. Operates with CRASH_REPORTER_SEND param in ini-file of the server.

<code>
GET PROPERTY CRASH_REPORTER_SEND OF server;
SET PROPERTY CRASH_REPORTER_SEND OF server TO 1;
</code>


==== DISABLEDNS==== 

Read-write system property. Operates with DISABLEDNS param in ini-file of the server.

<code>
GET PROPERTY DISABLEDNS OF server;
SET PROPERTY DISABLEDNS OF server TO 1;
</code>

==== FLUSHEACHDATACHANGES==== 

Read-write system property. Operates with FLUSHEACHDATACHANGES param in ini-file of the server.

<code>
GET PROPERTY FLUSHEACHDATACHANGES OF server;
SET PROPERTY FLUSHEACHDATACHANGES OF server TO 1;
</code>


==== HOSTINGMODE==== 

Read-only system property. Operates with HOSTINGMODE param in ini-file of the server.

<code>
GET PROPERTY HOSTINGMODE OF server;
</code>


==== LOGTOCONSOLE==== 

Read-write system property. Operates with LOGTOCONSOLE param in ini-file of the server.

<code>
GET PROPERTY LOGTOCONSOLE OF server;
SET PROPERTY LOGTOCONSOLE OF server TO 1;
</code>

==== LOGTOFILE==== 

Read-write system property. Operates with LOGTOFILE param in ini-file of the server.

<code>
GET PROPERTY LOGTOFILE OF server;
SET PROPERTY LOGTOFILE OF server TO 1;
</code>

==== LOGFILESLOCATION==== 

Read-write system property. Operates with LOGFILESLOCATION param in ini-file of the server.

<code>
GET PROPERTY LOGFILESLOCATION OF server;
SET PROPERTY LOGFILESLOCATION OF server TO 'myLogs';
</code>

==== LOGTOSYSLOG==== 

Read-write system property. Operates with LOGTOSYSLOG param in ini-file of the server.

<code>
GET PROPERTY LOGTOSYSLOG OF server;
SET PROPERTY LOGTOSYSLOG OF server TO 1;
</code>


==== MAILENABLE==== 

Read-write system property. Operates with MAILENABLE param in ini-file of the server.

<code>
GET PROPERTY MAILENABLE OF server;
SET PROPERTY MAILENABLE OF server TO 1;
</code>


==== MAXIDLECLIENTTIMEOUT==== 

Read-write system property. Operates with MAXIDLECLIENTTIMEOUT param in ini-file of the server.

<code>
GET PROPERTY MAXIDLECLIENTTIMEOUT OF server;
SET PROPERTY MAXIDLECLIENTTIMEOUT OF server TO 20;
</code>

==== MAXCONNECTIONTIMEOUT==== 

Read-write system property. Operates with MAXCONNECTIONTIMEOUT param in ini-file of the server. MAXCONNECTIONTIMEOUT applies specifically to the time between queries. The connection time out is about client inactivity. Any command sent to the server is a client activity, and not only SQL queries. 

<code>
GET PROPERTY MAXCONNECTIONTIMEOUT OF server;
SET PROPERTY MAXCONNECTIONTIMEOUT OF server TO 20;
</code>

==== MAXTRANSFERTIMEOUT==== 

Read-write system property. Operates with MAXTRANSFERTIMEOUT param in ini-file of the server. MAXTRANSFERTIMEOUT is the time allocated to actual transfer times of data. It is the time out to send/receive any single command or result from the server. 

<code>
GET PROPERTY MAXTRANSFERTIMEOUT OF server;
SET PROPERTY MAXTRANSFERTIMEOUT OF server TO 20;
</code>

==== PORT==== 

Read-write system property. Operates with PORT param in ini-file of the server.

<code>
GET PROPERTY PORT OF server;
SET PROPERTY PORT OF server TO 15432;
</code>

==== PORT_HTTP==== 

Read-write system property. Operates with PORT_HTTP param in ini-file of the server.

<code>
GET PROPERTY PORT_HTTP OF server;
SET PROPERTY PORT_HTTP OF server TO 0;
</code>

==== PORT_SSL==== 

Read-write system property. Operates with PORT_SSL param in ini-file of the server.

<code>
GET PROPERTY PORT_SSL OF server;
SET PROPERTY PORT_SSL OF server TO 0;
</code>

==== PORT_SNMP==== 

Read-write system property. Operates with PORT_SNMP param in ini-file of the server.

<code>
GET PROPERTY PORT_SNMP OF server;
SET PROPERTY PORT_SNMP OF server TO 0;
</code>

==== PRIVILEGESENABLE==== 

Read-write system property. Operates with PRIVILEGESENABLE param in ini-file of the server.

<code>
GET PROPERTY PRIVILEGESENABLE OF server;
SET PROPERTY PRIVILEGESENABLE OF server TO 0;
</code>

==== SINGLECONNECTIONPERLOGIN==== 

Read-write system property. Operates with SINGLECONNECTIONPERLOGIN param in ini-file of the server.

<code>
GET PROPERTY SINGLECONNECTIONPERLOGIN OF server;
SET PROPERTY SINGLECONNECTIONPERLOGIN OF server TO 1;
</code>


==== SCHEDULEENABLE==== 

Read-write system property. Operates with SCHEDULEENABLE param in ini-file of the server.

<code>
GET PROPERTY SCHEDULEENABLE OF server;
SET PROPERTY SCHEDULEENABLE OF server TO 0;
</code>

==== SERVERPATH ==== 

Read-only system property. Contains path to vServer executable.

<code>
GET PROPERTY SERVERPATH OF server;
</code>


==== SPLITLOGFILE==== 
**NOTE**: Added in 12.5.10

Read-write system property. If ON (default state) vServer checks the current log file size every 5 minutes, and if it is more than 20Mb, starts a new one.

<code>
GET PROPERTY SPLITLOGFILE OF server;
SET PROPERTY SPLITLOGFILE OF server TO 0;
</code>

==== SYSTEMCATALOG==== 

Read-write system property. Operates with SYSTEMCATALOG param in ini-file of the server.

<code>
GET PROPERTY SYSTEMCATALOG OF server;
SET PROPERTY SYSTEMCATALOG OF server TO 'Databases';
</code>

==== SYSTEMPROJECTCATALOG==== 

Read-write system property. Operates with SYSTEMPROJECTCATALOG param in ini-file of the server.

<code>
GET PROPERTY SYSTEMPROJECTCATALOG OF server;
SET PROPERTY SYSTEMPROJECTCATALOG OF server TO 'Projects';
</code>

==== SYSTEMBACKUPCATALOG==== 

Read-write system property. Operates with SYSTEMBACKUPCATALOG param in ini-file of the server.

<code>
GET PROPERTY SYSTEMBACKUPCATALOG OF server;
SET PROPERTY SYSTEMBACKUPCATALOG OF server TO 'Backup';
</code>

==== SYSTEMSSHKEYSFOLDER ==== 

Read-write system property. Operates with SYSTEMSSHKEYSFOLDER param in ini-file of the server.

<code>
GET PROPERTY SYSTEMSSHKEYSFOLDER OF server;
SET PROPERTY SYSTEMSSHKEYSFOLDER OF server TO 'SSHKeys';
</code>


==== SSL_CERTIFICATE==== 

Read-write system property. Operates with SSL_CERTIFICATE param in ini-file of the server.

<code>
GET PROPERTY SSL_CERTIFICATE OF server;
SET PROPERTY SSL_CERTIFICATE OF server TO 'dummy.pem';
</code>

==== SSL_PRIVATEKEY==== 

Read-write system property. Operates with SSL_PRIVATEKEY param in ini-file of the server.

<code>
GET PROPERTY SSL_PRIVATEKEY OF server;
SET PROPERTY SSL_PRIVATEKEY OF server TO 'key.pem';
</code>

==== THREADS==== 

Read-write system property. Operates with THREADS param in ini-file of the server.

<code>
GET PROPERTY THREADS OF server;
SET PROPERTY THREADS OF server TO 5;
</code>

==== USEOLDPASSWORDS==== 

Read-write system property. Operates with USEOLDPASSWORDS param in ini-file of the server.

<code>
GET PROPERTY USEOLDPASSWORDS OF server;
SET PROPERTY USEOLDPASSWORDS OF server TO 0;
</code>

==== VERBOSELEVEL==== 

Read-write system property. Operates with VERBOSELEVEL param in ini-file of the server.

<code>
GET PROPERTY VERBOSELEVEL OF server;
SET PROPERTY VERBOSELEVEL OF server TO 3;
</code>