1. jaume
  2. Valentina Reports ADK
  3. Mittwoch, November 06 2019, 08:44 AM
  4.  Abonnieren via E-Mail
Hello,
I'm trying to print on label printer but I'm expecting some problems

In the editor, the label appears like portrait so i must set landscape but when I print the pagination is not correct, it print in the midle of 2 labels.

What I'm doing wrong ?

Regards,

Jaume
Anhänge
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
Hello Jaume,

Try to set height bigger than width, for example 100 mm and recreate a report.
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
Hello,

It does'nt work because 2 labels are printed in the same label.

I tested it in ms word and it works fine.

Regards,

Jaume
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
Hello Jaume,

So preview or generated PDFs for this report are correct?
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
Aparently yes, but printing pagination fails
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
Please add more details about your layout.

As I have seen the label printer paper width is 83 mm, right?
And it prints on a paper roll, right?

Screenshot of preview and a photo of the printed result will help, too.
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
Labels are printed differently - in a paper formats editor you have to specify the size of the paper, you're printing on, not the size of the label.
The size of the label you define in the layout.

If it is a paper roll - check ignore_pagination and specify height bigger than the width, like 80x100mm.

As a result you'll have multiple labels on the page, instead of small multiple pages with one label on each.
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
unfortunatelly pagination is not correct and printed labels are no correct.
Besides, it takes 45 seconds to print 5 labels. I'm using a printer label.

I've attached and vrp file and scanned labels
Anhänge
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
Here is the .vrp file
Anhänge
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
Is it Star TSP700?
I remember you had a problem with reduced size, something related to the drivers.
What if you print on an ordinary printer to compare?
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
No, it's a cab squix 4/300
recreating the report whith 80x31
and rotating the items 90 º the printed label is fast and the quality is really good, but pagination is not correct .Always print the contents of the label in the same place but it leaves a empty label between label and label.
Anhänge
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
When labels on different "pages" the distance between these pages is controlled entirely by the printer.

What if you export a report with multiple labels on the page (from screenshot Captura de Pantalla 2019-11-07 a les 15.45.59.png) as PDF and print it on this printer - is it correct?
It is connected with USB, the latest drivers are installed, right?
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
althought the codebar is smaller then labels are correct ( don't know if scanners will work properly)

I'm printing using USB I personally thing that this is not important, and about de drivers are the latest
Anhänge
Kommentar
There are no comments made yet.
Sergey Pashkov Akzeptierte Antwort
And the latest scan is from printed PDF?

You can also adjust the width of the bars - bar_width and thin properties.

Sometimes connection matters - one of the users had problems with wireless connection to the printer but USB connection worked.
Anhänge
Kommentar
There are no comments made yet.
jaume Akzeptierte Antwort
yes, I did it
Kommentar
There are no comments made yet.
  • Seite :
  • 1


There are no replies made for this post yet.
However, you are not allowed to reply to this post.

Categories

Announcements & News
  1. 0 subcategories
Valentina Studio
  1. 2 subcategories
Valentina Server
  1. 4 subcategories
Valentina Database ADK
  1. 0 subcategories
Valentina Reports ADK
  1. 0 subcategories
Other Discussions
  1. 0 subcategories
BETA Testing
  1. 0 subcategories
Education & Research
  1. 0 subcategories
Omegabundle
  1. 0 subcategories